ZR53

Before applying the product, make sure that the vehicle is clean and dry. Make sure to apply the product in a shadow area.

Please remember to read the product instruction booklet and watch the ZR53 application video before beginning the process.

Nasiol ZR53 is a nano paint protection product developed to be applied by both professional and novice end users, and its application time is in the range of 60-90 minutes for standard passenger cars. Please remember that this time range is only for the ZR53 application and does not include the time potentially spent on scratch removal. The product applied incorrectly without paying attention to the application instructions can only be taken from the surface by a scratch removing compound or sanding.

In order to obtain maximum efficiency from the product, the ideal conditions (temperature + 5˚C to + 30˚C, humidity 50%) should be within the specified range.
The surface where the ZR53 is to be applied should not be extremely cold or hot. Do not apply the product under direct sunlight. Prior to ZR53 treatment, clean the surface and remove imperfections with a clay bar. After cleaning the vehicle surface, if the surface requires it use a compound like Nasiol’s silicone-free compound of Clearub 305 to remove the scratches prior to ceramic coating treatment. Once the scratch removal process is completed, wash and dry the surface one more time. To remove the excess water from hard to reach places, it is recommended to use an air gun to dry out the vehicle and please be sure that the surface is completely dried. Clean the remaining residues such as compound dust with the help of a clean and lint-free micro fiber and make it ready for ZR53 application with Nasiol Clean – a solution designed for pre-ceramic coating treatment cleaning.. Partition the surface of the vehicle to be applied with a masking tape and make sure that it does not leave any residue. The partition should be around 1m2 (10 sqft) If the temperature and humidity values of the application environment are above + 30C and 50%, it will be more beneficial to work in smaller areas as the product curing time will shorten..

Wear the included protective nitrile gloves before using ZR53. Gently shake the product bottle few times before using. With the application pad placed on top of the open ZR53 bottle, turn the bottle upside down so the product solution adheres to the pad. Repeat this process for about 4-5 times and remember to repeat this process for each divided section.

Apply the product to the surface with linear movements in horizontal and vertical axes without excessive pressure. After the application to the surface, when the product starts to collect / bubble (normally about 30 seconds) wipe the surface with the included cloth in a circular motion without applying too much pressure. Make sure to pay attention to the bubbling process. In about 30 seconds the formula will begin to settle and it may become very difficult to wipe off after it cures. If this instance takes place, the product application should be repeated by applying polishing with a 2000 grit sandpaper to the relevant surface. To get the most out of the cloths, it is recommended to fold it in four section. As the product remaining on the previously used parts of the cloths will cure and harden, use the same part, making sure that there is no crystallization in more than 2 parts. After wiping with the first cloth, use the long feathered microfiber cloth to complete the final polishing process with circular movements without applying too much pressure. Wiping and polishing with a cloth will increase the efficiency of the coating. Make sure that there are no parts that were not applied or skipped between sections.

After the application process is completed, coated surfaces should be protected from contact with water, dirt, direct sunlight and chemicals for 24 hours.

Full protection against abrasion and detergents is gained after 48 hours. Therefore, the coated surface should not be washed during the first 48 hours.

A single layer of product application is sufficient for durability. Approximate consumption values according to passenger vehicle classes are as follows:

Small Vehicle: 30-35 ml (A-B class)
Standard Size Vehicle: 35-40 ml (C-D class)
Large Vehicles: 40-50 ml (E-SUV class)

Approximate consumption values according to passenger vehicle classes are as follows:

Small Vehicle: 30-35 ml (A-B class)
Standard Size Vehicle: 35-40 ml (C-D class)
Large Vehicles: 40-50 ml (E-SUV class)

ZR53 is safe to be applied on lacquered plastic, metal, painted metal surfaces.

Nasiol ZR53 is a paint protection product applied on the exterior surfaces of motor vehicles. This product, also known as Nano Ceramic coating, enables the surface to become resistant to scratches, provides water and oil repellency and provides easy cleaning of challenging stains such as bird droppings and road salt residue. It protects the color of the vehicle paint by providing UV protection, and with minimal care ZR53 can provide 3 years of protection.

Scratch resistance
Water and oil repellency
UV protection
Chemicals resistance
Easy to clean
Protection against bird droppings and all other environmental influences

Provides durability up to 3 years with minimal maintenance.

The product, if applied incorrectly, can only be removed from the surface through polishing or a sanding process. Utilizing a compound such as Nasiol’s Clearub 105 or Nasiol’s Clearub 305 will aid in correcting application errors effectively.

You can buy ZR53 from our online store, ekspermarket.com, or by contacting us via

info@nasiol.com or +90 212 670 13 95

It should definitely not be eaten. We have toxicity certificates and MSDS documents showing that our products are harmless to human health and the environment. You can view these documents by contacting our sales team. However, do not eat the product regardless and seek medical help if someone has eaten the product.

Our retail and wholesale prices are different from each other. Ekspermarket.com is our shopping site where you can see the retail prices. Please contact our sales team for our wholesale prices.

You can easily do the application by yourself and by following instructions on our application video.

ZR53 product is applied in one coat and there is no need for a second coat.

It extends the paint life of the vehicle, provides protection against fine scratches, provides easy cleaning of the vehicle from stains that are difficult to remove such as bird droppings and thanks to its water and oil repellent properties, protects the vehicle surface against sun rays, acid rain, and harmful effects of chemicals.

In the product instructions, it is written that the product should not be used before 3 months on newly painted surfaces. The reason for this is that the bonding performance of the product to the well-dried paint is much higher. When the paint does not dry completely, it does not show a fully resistant (stable) surface behavior to which our coatings will bond. For full performance, 3-4 months should pass after painting.

Nasiol ZR53 50 ml contains enough product for 1 vehicle.

It has REACH certificate, LFGB certificate and ISO certificate, Volkswagen TL211 (resistance to various hazardous chemical components) certificate.

No. Please do not apply ZR53 on PPF.

You can benefit from our special branding study for the unboxed Nasiol ZR53, and create your own brand by choosing from our catalog we have created for this purpose.

With suitable spray bottles, yes, industrial type, solvent resistant, flow regulated bottles can be used. Air spray bottles should be preferred instead of air guns.

Unfortunately no. The warranty or agreement can only be given by the applicator, depending on the fact that we only supply the product and the application part is the main point in achieving the desired durability and effect.

The only way to clean the incorrectly applied ZR53 is through wet blasting of 2000.

This may be due to the accumulation of minerals in the water droplets. Some types of hard water can cause this situation. It is recommended to protect the surface from such hard water types for one month after new applications.

Nasiol MF2 and Nasiol ZR53 are both paint protective products for vehicles such as cars and yachts. Nasiol MF2 is less durable than Nasiol ZR53, its durability on the surface is up to 1 year and it has no resistance to surface scratches, but Nasiol ZR53 lasts up to 3 years and is resistant to surface scratches. However, MF2 is much easier to apply with its unique spray method. The other advantage of MF2 is its price, compared with ZR53, MF2 is inexpensive and it can be used as refresher on a vehicle that has been protected with ZR53 and NL272. Finally, MF2 can be applied on Nasiol ZR53 as a second layer to increase the strength and brightness.

Nasiol NL272 and Nasiol ZR53 are both paint protective products for motor vehicles. Nasiol ZR53 provides strength up to 3 years, while Nasiol NL272 provides strength up to 5 years.

Nasiol ZR53 has a completely different synthesis and production method, which makes Nasiol ZR53 a leader in efficiency and strength. This provides more resistance to scratches than other coatings, the protection coverage is better than others.

The unopened bottle can be stored for 1 year under suitable storage conditions.

The product that is not completely finished after opening the bottle; It should be consumed within 1 week by making sure that the opening is tightly closed. The unopened bottle can be stored for 1 year under suitable storage conditions.

Our products have a European Union approved REACH certificate, which shows that they do not contain any toxic substances. For the Nasiol ZR53 branded product, according to the test results within the scope of LFGB (Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch), which is a well-known and respected German food safety standard, it was observed that Nasiol ZR53 does not have a harmful effect on human health when food comes into contact with the surface coated with Nasiol ZR53. In other words, you can safely use our Nasiol ZR53 product on surfaces that come into contact with food.

Nasiol ZR53 is suitable for plastic, metal, painted metal surfaces. It should not be applied to other surfaces.

Our nano coatings consist of nanoscale silicon dioxide particles.

It is recommended to use gloves during product application, which do come with the product. If the product accidentally comes into contact with the skin, wash it off immediately with soap and plenty of water. After contact with skin, take off immediately all contaminated clothing and rinse immediately with plenty of water. If irritation persists after washing, seek medical attention.

Most Nasiol products are solvent-based so they have fragrances in their liquid form. After the products are cured, there is no odor.

Nasiol ZR53 provides protection against fine scratches. In other words, key scratches, scratches caused by pebbles splashing during travel, etc.

Once you have applied the Nasiol ZR53 correctly, there is no need for an additional coat, because considering the first coat on the car, it is unnecessary to apply the second coat as there will be no additional surface left for Nasiol ZR53 to access and bond.

50 ml product bottle, application guide, a pair of gloves, 10 application pads, 1 micro fiber and a polishing cloth, 1 Nasiol glass sticker.

There are 10 products in the case box.

Yes. You can create your own brand. Please contact us for details.

For the full performance of the product, the surface should be kept for 48 hours.

Ceramic coating can be a good option for protecting your car’s paint and maintaining its appearance. Ceramic coatings are made of a liquid polymer that chemically bonds with the paint on your car, creating a durable and long-lasting layer of protection.

Ceramic coatings provide several benefits for your car, including:

Protection from UV rays: Ceramic coatings help to protect your car’s paint from the damaging effects of UV rays, which can cause the paint to fade and become discolored over time.

Protection from scratches: Ceramic coatings create a hard, durable layer of protection that can help to prevent scratches and other minor damage to your car’s paint.

Easy to clean: Ceramic coatings create a smooth surface that makes it easier to clean your car. Dirt and grime are less likely to stick to the surface, making it easier to maintain the appearance of your car.

However, it’s important to note that ceramic coatings can be expensive, and the application process can be time-consuming.

Additionally, while ceramic coatings can provide a significant amount of protection, they are not completely scratch-proof or damage-proof. It’s still important to take proper care of your car and avoid exposing it to harsh environmental conditions to help ensure its longevity.

The longevity of a ceramic coating can vary depending on several factors, including the quality of the product, the application process, and the care the coating receives after application. In general, a ceramic coating can last between two and five years, with some high-quality coatings lasting up to ten years. However, it’s important to note that the coating’s durability can be affected by environmental factors such as exposure to sunlight, extreme temperatures, and harsh chemicals.

Ceramic coating is a type of protective coating applied to the exterior surfaces of cars, boats, and other vehicles to help protect them from environmental damage and maintain their appearance. The coating is made from a liquid polymer that chemically bonds with the surface it is applied to, creating a durable and long-lasting layer of protection.

Cleaning a car after ceramic coating requires some care to avoid damaging the coating. Here are some tips for cleaning your car after ceramic coating:

Use a professional car wash shampoo: Avoid using harsh detergents or soaps with high pH levels, as they can strip the coating and reduce its effectiveness. Use a gentle, professional car wash shampoo designed for automotive use.

Use a microfiber wash mitt: Use a soft, microfiber wash mitt to gently wash the surface of the car. Avoid using abrasive sponges or brushes, as they can scratch the surface of the coating.

Rinse thoroughly: After washing, rinse the car thoroughly with clean water to remove all soap residue.

Dry with a soft towel: Use a soft, microfiber towel to gently dry the car after washing. Avoid using rough or abrasive towels, as they can scratch the surface of the coating.

By following these tips, you can help to maintain the appearance and effectiveness of your car’s ceramic coating, while avoiding damage or reduced effectiveness over time.

Ceramic coating and wax both provide a layer of protection to the paint on your car, but they differ in several ways.

Ceramic coating provides a much more durable and long-lasting layer of protection than wax. While wax typically lasts for several weeks to a few months, ceramic coating can last for several years with proper care. Ceramic coating is also more resistant to environmental damage such as UV rays, scratches, and chemical stains.

Ceramic coating also provides a higher level of hydrophobicity than wax, which means it repels water and dirt more effectively. This makes it easier to clean and maintain the appearance of your car.

Technically, it is possible to wax over ceramic coating, but it is not recommended. Ceramic coatings are designed to bond directly to the surface of the paint, forming a durable and long-lasting protective layer. Adding wax on top of the coating can reduce its effectiveness, as the wax may fill in the pores of the coating and reduce its ability to repel water and dirt.

Additionally, applying wax on top of a ceramic coating can be time-consuming and may require more frequent reapplication than the ceramic coating alone. This is because the wax may wear off more quickly than the ceramic coating, which can compromise the overall protection of the surface.

Ceramic coatings are designed to provide a layer of protection to your car’s paint and can help to prevent scratches and other minor damage. However, they can not remove scratches that are already present on the surface of the paint.

If you have scratches on your car’s paint, you may need to have them professionally repaired by a body shop or detailer. Depending on the severity of the scratches, this may involve sanding, polishing, or other techniques to remove or minimize the damage.

After the scratches have been repaired, you can apply a ceramic coating to help protect the surface and prevent future damage. However, it’s important to note that even with a ceramic coating in place, your car’s paint is still susceptible to scratches and other types of damage from environmental factors such as debris, rocks, and other hazards on the road.

Yes, a ceramic-coated car can still get dirty just like any other car. However, the ceramic coating can help to prevent dirt, grime, and other contaminants from bonding to the surface of the paint. This makes it easier to clean the car and maintain its appearance over time.

One of the benefits of ceramic coating is that it creates a hydrophobic surface that repels water and dirt. This means that water and dirt will bead up and roll off the surface of the car more easily, reducing the amount of dirt that accumulates on the surface. Additionally, because the coating is more resistant to chemical stains and UV damage, it can help to keep the car looking cleaner and more vibrant over time.

However, it’s important to note that a ceramic coating does not make your car completely immune to dirt or environmental damage. The car will still need to be washed regularly to keep it clean and free from contaminants that can damage the coating or the paint.

Yes, You can wash it after taking the curing. The curing time of each product may be different, it should be noted.

In fact, it’s important to keep your car clean and free of dirt and contaminants to maintain the integrity of the ceramic coating.

When washing your ceramic-coated car, it’s important to use gentle washing techniques to avoid scratching the surface. You should use a professional car wash shampoo and a microfiber wash mitt or sponge to gently wash the car, avoiding aggressive scrubbing or rubbing. It’s also important to rinse the car thoroughly to remove all soap and dirt before drying.

After washing, you can dry the car using a soft microfiber towel or a drying aid to prevent water spots from forming on the surface. Avoid using abrasive towels or chamois, as these can scratch the surface of the ceramic coating and damage its hydrophobic properties.

Overall, washing your ceramic-coated car is an important part of maintaining its appearance and protection. Regular washing can help to remove dirt, grime, and other contaminants that can compromise the integrity of the coating, allowing it to continue to protect your car’s paint for years to come.

When washing a car that has been coated with ceramic, it’s important to use gentle washing techniques to avoid damaging the coating. Here are some steps you can follow to safely wash your ceramic-coated car:

Rinse the car: Before washing, rinse the car thoroughly with water to remove any loose dirt or debris.

Use a professional car wash shampoo: Choose a high-quality, professional car wash shampoo to avoid damaging the ceramic coating. Avoid using harsh or abrasive detergents or soaps.

Use a microfiber wash mitt: Use a soft, clean microfiber wash mitt to gently wash the car. Avoid using sponges, brushes, or other abrasive materials that can scratch the coating.

Work in sections: Work in small sections, washing one area at a time to ensure that you get all the dirt and grime off before moving on to the next section.

Rinse thoroughly: Rinse the car thoroughly with water to remove all soap and dirt before drying.

Dry with a soft microfiber towel: Use a soft, clean microfiber towel to gently dry the car, avoiding aggressive rubbing or scrubbing. It’s important to remove all water from the surface to prevent water spots.

Consider using a drying aid: To make drying easier and prevent water spots, you can use a drying aid or spray wax. Simply spray the product onto the surface of the car and use a microfiber towel to buff it in.

By following these steps, you can safely wash your ceramic-coated car and maintain its appearance and protection for years to come.

How often you should wash your ceramic coated car depends on a number of factors, such as how frequently you drive the car, the weather conditions, and the level of dirt and contaminants that the car is exposed to. In general, it’s a good idea to wash your ceramic coated car every 1-2 weeks to maintain its appearance and protection.

Ceramic coatings are designed to be highly durable and long-lasting, but regular washing is still important to prevent dirt, grime, and other contaminants from building up on the surface. If you allow dirt and contaminants to accumulate on the surface of the coating, it can compromise its effectiveness and leave your car vulnerable to damage.

In addition to regular washing, you may also want to consider applying a maintenance coating or spray sealant every few months to help extend the life of the ceramic coating and keep your car looking its best. These products can help to rejuvenate the coating and restore its hydrophobic properties, making it easier to clean and maintain over time.

Ultimately, the key to maintaining a ceramic coated car is to be proactive about cleaning and maintenance. By washing the car regularly and using high-quality detailing products, you can keep your car looking great and protected from environmental damage for years to come.

After your car has been coated with ceramic, there are some things that you should avoid doing to ensure the longevity and effectiveness of the coating. Here are some of the things that you should not do after ceramic coating:

Don’t wash the car too soon: It’s important to let the ceramic coating cure for at least 48 hours before washing the car. This allows the coating to fully bond to the surface of the paint and ensures that it will provide maximum protection.

Don’t use harsh chemicals: Avoid using harsh chemicals or abrasive cleaners on the ceramic coating, as these can damage the surface and compromise its effectiveness.

Don’t use automatic car washes: While some automatic car washes may be safe for ceramic coatings, many are not. Avoid using automatic car washes that use harsh chemicals, high-pressure sprays, or brushes that can scratch the surface of the coating.

Don’t park under trees or in direct sunlight: Try to avoid parking your car under trees or in direct sunlight for extended periods of time, as this can cause sap, bird droppings, and other contaminants to accumulate on the surface of the coating and damage the paint.

Don’t apply wax or sealant: You should not apply wax or sealant over the ceramic coating, as this can compromise its hydrophobic properties and reduce its effectiveness.

By avoiding these common mistakes, you can help to ensure that your ceramic coating provides long-lasting protection and keeps your car looking great for years to come.

Keeping a ceramic car coating shiny requires regular cleaning and maintenance. Here are some tips for keeping your ceramic coated car looking shiny and new:

Wash regularly: Regular washing is important to remove dirt, grime, and other contaminants that can dull the shine of the ceramic coating. Wash your car at least once every 1-2 weeks, or more frequently if you drive frequently or in harsh conditions.

Use a high-quality car wash shampoo: Use a professional car wash shampoo to avoid damaging the ceramic coating. Avoid using harsh or abrasive detergents or soaps.

Use a microfiber wash mitt: Use a soft, clean microfiber wash mitt to gently wash the car. Avoid using sponges, brushes, or other abrasive materials that can scratch the coating.

Dry thoroughly: After washing, dry the car thoroughly using a soft, clean microfiber towel to avoid water spots.

Apply a ceramic coating maintenance spray: Applying a ceramic coating maintenance spray every few months can help to rejuvenate the coating and restore its hydrophobic properties. Simply spray the product onto the surface of the car and use a microfiber towel to buff it in.

Avoid parking under trees: Try to avoid parking your car under trees or in direct sunlight for extended periods of time, as this can cause sap, bird droppings, and other contaminants to accumulate on the surface of the coating and damage the paint.

By following these tips and maintaining a regular cleaning and maintenance routine, you can keep your ceramic coated car looking shiny and new for years to come.